Canon C50 manual II-22, Change Cartridge

Message

Error Code

Cause

Action

CHANGE CARTRIDGE	#052	The BJ cartridge is
		empty or its ink has
		dried out.

Make a copy or print a document. If the printout is light or blank, replace the BJ cartridge. Documents received in memory will then be printed automatically.

The MultiPASS C50's image memory may be full because the BJ cartridge ran out of ink.

Replace the BJ cartridge and have the other party send the fax again.

CHECK DOCUMENT	#001	A document is jammed
		in the Automatic
		Document Feeder
		(ADF).
		The document feed
		lever is set to manual
		document feed.
CHECK PAPER SIZE	±	The size of the paper in
		the sheet feeder differs
		from that speci®ed in
		the Paper Size option
		in the Receive Fax tab.
CHECK PRINTER	±	The BJ cartridge in the
		MultiPASS C50 is
		defective.

CLEAR PAPER JAM	#009	The MultiPASS C50
		has no paper in its
		sheet feeder, or has a
		paper jam.
COMMUNICATING	±	You tried to use
PLEASE WAIT		manual sending while
		the fax was sending
		from memory.

Remove the document you are trying to send or copy and load it again.

Set the document feed lever to automatic document feed.

Set the correct paper size in the Paper Size option in the Receive Fax tab.

1.Press the (STOP) button.

2.Reinstall the cartridge.

3.Unplug the MultiPASS C50, wait 5 seconds, then plug it in again. If the display does not change, call for service.

Add paper or clear the jam, then press the (STOP) button. If a document was received in memory, the fax is automatically printed from memory.

Wait until the fax is sent and try again, or use memory sending.

II-22