Canon C50 manual II-24, Memory Full

Message

Error Code

Cause

Action

MEMORY FULL	#037	The MultiPASS C50's
		memory is full because
		it has received too

many documents, or a very long or detailed document.

Print out any documents that are stored in memory. Then start the operation again. See page 5-12.

		The memory is full
		because you sent too
		many pages at once, or
		a very long or detailed
		document.
MEMORY FULL	±	The MultiPASS C50 is
PLEASE WAIT		sending a fax and its
		memory is full.
MEMORY USED nn%	±	Shows how much of the
		MultiPASS C50's
		memory is in use.
NO ANSWER	#005	The receiving fax
		machine does not
		answer.
NO TEL #	#022	The one-touch or
		coded speed dialling
		number has not been
		registered.
NOT AVAILABLE	±	In manual sending via
		the handset, you tried
		to use a one-touch
		speed dialling button or
		a coded speed dialling
		code that has a group
		registered in it.

Divide the document and send each part separately. If the memory contains any faxes, you do not need to delete them.

Wait until the fax is sent. The MultiPASS C50 continues to send the fax as memory becomes available.

If you need more memory, print or send any documents stored in memory.

Make sure you dialled the correct number. Try again later.

Register the number.

In manual sending via the handset, you cannot send a document to multiple destinations. Send the document to one destination at a time.

PLEASE WAIT	±	The MultiPASS C50 is	Wait until the time and
		warming up.	receiving mode appear in
			the LCD display, then
			begin.

PUT IN CARTRIDGE	±	The BJ cartridge is not
		installed properly.

Make sure the BJ cartridge is installed properly and the green lock lever is set properly.

II-24