Canon C50 manual II-23, DOC TOO Long

Message

Error Code

Cause

Action

DOC TOO LONG	#003	It took more than 32
		minutes to send or
		copy a document.

It took more than 32 minutes to receive a document.

Divide the document and send or copy each part separately.

Contact the sender, and have them divide the document and send each part separately.

The document is longer	Use a copy machine to
than 1 metre.	copy each page of the
	document and send the
	copy.

DOCUMENT READY	±	The document in the
		Automatic Document
		Feeder (ADF) is ready
		for scanning.

Send the fax, scan the document, or make a copy.

ECM RX	±	The MultiPASS C50 is
		receiving a fax using
		ECM.

Faxes can take longer to receive when using ECM. Try turning ECM off if you need to receive quickly, or if you know your local telephone lines are in good condition.

ECM TX	±	The MultiPASS C50 is
		sending a fax using
		ECM.

Faxes can take longer to send when using ECM. Try turning ECM off if you need to send quickly, or if you know your local telephone lines are in good condition.

HANG UP PHONE	±	The handset is off its
		hook.
INSTALL BC-21	±	The BC-20, BC-22/22e,
		or BC-29F BJ
		Cartridge is installed.
INSTALL BC-21/20	±	The BC-22/22e or
		BC-29F BJ Cartridge is
		installed, so the
		MultiPASS C50 cannot
		print any received
		faxes, or make copies.

Place the handset properly onto its hook.

Remove the BC-20, BC-22/ 22e, or BC-29F BJ Cartridge and install the BC-21/21e BJ Cartridge.

Remove the BC-22/22e or BC-29F BJ Cartridge and install the BC-21/21e or BC-20 BJ Cartridge.

LOAD PAPER	±	The MultiPASS C50 is	Add paper to the sheet
		out of recording paper.	feeder. Make sure the
			stack is below the limit
			mark (		). Then press
			the	(STOP) button.

II-23