Canon C50 manual Loading Print Media for Automatic Feed, Press Cartridge

5.Peel the protective foil off the new BJ cartridge's protective packaging, and remove the cartridge.

6.Lift the orange cap off the cartridge's print head, then remove the orange tape.

7.Hold the cartridge so the label faces outward, tilt it slightly forward and to the right, then slide it into the cartridge holder.

8.Lower the green lock lever completely. The BJ cartridge is now locked into position.

9.Set the paper thickness lever. For printing on plain paper:

		Cartridge	Thickness Lever Position
		BC-21/21e Colour BJ Cartridge (black)	centre
		BC-21/21e Colour BJ Cartridge (colour)	centre
		BC-20 Black BJ Cartridge	left
	10.	Close the printer cover.
CARTRIDGE	11.	Press CARTRIDGE.

Loading Print Media for Automatic Feed	(2-45)
1. Pull the paper rest up until it stops.

2.Pick up a stack of sheets and fan the edge that will feed into the MultiPASS C50 ®rst, then tap the stack on a ¯at surface to even its edges.

3.Insert the stack into the sheet feeder until its stops, so that the right edge of the stack is aligned with the right side of the sheet feeder.

4.Slide the paper guide snugly against the sides of the stack. You are now ready to print.

The numbers in parentheses indicate the pages in the MultiPASS C50 User's Guide on which you can ®nd detailed information.

I-8