Attaching the Sending Document Support |
To install this support, insert one of its tabs into the corresponding slot above the MultiPASS C50's Automatic Document Feeder (ADF), then ± ®rmly but gently ± insert the other.
Attaching the Document Support |
The ends of the metal support ®t into the slots on the front of the MultiPASS C50, as shown below. To install it, slightly squeeze the ends of the support toward each other, insert them in the slots, and gently release them. Then slide the support into the unit until it clicks in position.
When the support is installed, you can pull it out or push it in to suit the size of the document.
The numbers in parentheses indicate the pages in the MultiPASS C50 User's Guide on which you can ®nd detailed information.