Installing and Configuring the 82350 1
Step 4: Configuring the 82350
This step shows how to configure a Windows XP/Vista/7 operating system for a PC that has an 82350 installed.
Installing configuration files
N O T E
1Apply Power. Apply power to the PC and to the installed GPIB instruments. As Windows starts again, a Found New Hardware Wizard may start.
2Install Configuration Files. Click Next> to accept the defaults. (Make sure that you have installed Agilent IO Libraries Suite first. You will not need a CD.) Click Finish to complete the installation.
3Open Connection Expert. Click the Agilent IO Control icon in the Windows Notification area, and then click Agilent Connection Expert. When the main screen appears, you will see a map of the system connections in the Instrument I/O on this PC pane (also called “Explorer Pane”). If you see your interface and instruments in the Explorer Pane, you are ready to go!
For help with Connection Expert, refer to the Agilent IO Librar- ies Suite help file. This help file is available from the IO Control > Documentation menu.
82350B Installation and Configuration Guide | 23 |