Airlink101 AP411W user manual Configuration Wlan Partition, Configuration Access Control Settings

Page 18

Configuration – WLAN Partition

Wireless Band: Select to set the signal to 802.11g or 802.11g/802.11b.

Internal Station Connection: Check Enabled to allow internal wireless clients to connect to the Access Point.

Ethernet to WLAN Access: Check Enabled to allow the wired part of your network to connect with the wireless clients.

Click Apply to save any changes.

Configuration – Access Control Settings

18

Image 18

Contents Model # AP411W User’s Manual Table of Contents Package Contents IntroductionConnections Wireless Basics Installation Considerations Connecting the Access Point Establishing Wireless Connection Configuring the Access Point OptionalSsid default Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility Advanced Setup Configuration IP Address255.0.0.0 Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Wlan Partition Configuration Access Control SettingsConfiguration Security Settings ControlKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Maintenance Update Firmware Management MiscMaintenance Configuration File Maintenance Restart SystemStatistics Page Troubleshooting Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Forgot my encryption key Reset Technical Specifications Device ManagementTechnical Support Receiver Sensitivity