Airlink101 AP411W user manual Click Close

Page 9

Step 4 Select Use the following IP address and enter an IP address of 10.0.0.x (where x is any number between 2 - 254). Also enter 255.0.0.0 for the Subnet mask and 10.0.0.1 for the Default gateway and click OK.

Step 5 Click Close.

Step 6 Open the web browser and type in 10.0.0.1 in the address field and press Enter.

Step 7 At the login screen, enter admin for both the user name and password, and click OK.

Image 9

Contents Model # AP411W User’s Manual Table of Contents Introduction Package ContentsConnections Wireless Basics Installation Considerations Connecting the Access Point Establishing Wireless Connection Configuring the Access Point OptionalSsid default Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility Advanced Setup Configuration IP Address255.0.0.0 Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Access Control Settings Configuration Wlan PartitionControl Configuration Security SettingsKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Management Misc Maintenance Update FirmwareMaintenance Restart System Maintenance Configuration FileStatistics Page Troubleshooting Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Forgot my encryption key Reset Device Management Technical SpecificationsReceiver Sensitivity Technical Support