Airlink101 AP411W user manual Management Misc, Maintenance Update Firmware

Page 24

Management – Misc

Telnet Service: Check Enabled to allow Telnet Service through the Access Point.

Timeout: Select the timeout interval. Default is 3 minutes.

Click Apply to save any changes.

Maintenance – Update Firmware

Firmware Version: Displays the current firmware version number.

Update File: After downloading the updated firmware from the vendor’s web site, click on Browse to browse to the downloaded file, click OK to update the firmware.

Image 24

Contents Model # AP411W User’s Manual Table of Contents Package Contents IntroductionConnections Wireless Basics Installation Considerations Connecting the Access Point Establishing Wireless Connection Configuring the Access Point OptionalSsid default Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility Advanced Setup Configuration IP Address255.0.0.0 Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Wlan Partition Configuration Access Control SettingsConfiguration Security Settings ControlKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Maintenance Update Firmware Management MiscMaintenance Configuration File Maintenance Restart SystemStatistics Page Troubleshooting Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Forgot my encryption key Reset Technical Specifications Device ManagementTechnical Support Receiver Sensitivity