Airlink101 AP411W user manual Connections

Page 4

Connections

Receptor

for the Power

Adapter

Pressing the

Reset Button restores the Access Point to its original factory default settings.

The LAN Port is Auto-MDI/MDIX. You can insert either a straight-through or a crossover Ethernet cable in this port in order to connect the Access Point to the local network.

LEDs

Power: Solid green indicates power is on.

LAN: Solid green indicates an established connection. Blinking green indicates activity on the Ethernet port.

WLAN: Blinking green indicates wireless connection.

4

Image 4

Contents

Model # AP411W User’s Manual Table of Contents Package Contents IntroductionConnections Wireless Basics Installation Considerations Connecting the Access Point Configuring the Access Point Optional Establishing Wireless ConnectionSsid default Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility Configuration IP Address Advanced Setup255.0.0.0 Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Wlan Partition Configuration Access Control SettingsConfiguration Security Settings ControlKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Maintenance Update Firmware Management MiscMaintenance Configuration File Maintenance Restart SystemStatistics Page Troubleshooting Why can’t I get a wireless connection? Why does my wireless connection keep dropping?Forgot my encryption key Reset Technical Specifications Device ManagementTechnical Support Receiver Sensitivity