Airlink101 AP411W user manual

Page 11

Step 10 Select to enable or disable WEP encryption and click Next. If you already have WEP encryption enabled for your existing wireless network, you must enter the identical encryption settings here.

Step 11 Click Reboot to save and apply the settings.

Note: Once you have configured the settings, you’ll need to change the TCP/IP settings back to dynamic IP. Follow steps 1 - 3 of this section and change the TCP/IP properties back to “Obtain an IP address automatically.” Restart your computer afterwards.

For further configuration including WPA encryption, please use the Advanced Setup link.

11

Image 11

Contents Model # AP411W User’s Manual Table of Contents Introduction Package ContentsConnections Wireless Basics Installation Considerations Connecting the Access Point Ssid default Establishing Wireless ConnectionConfiguring the Access Point Optional Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility 255.0.0.0 Advanced SetupConfiguration IP Address Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Access Control Settings Configuration Wlan PartitionControl Configuration Security SettingsKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Management Misc Maintenance Update FirmwareMaintenance Restart System Maintenance Configuration FileStatistics Page Troubleshooting Forgot my encryption key Why does my wireless connection keep dropping?Why can’t I get a wireless connection? Reset Device Management Technical SpecificationsReceiver Sensitivity Technical Support