Airlink101 AP411W user manual Reset

Page 30

Reset

To hard-reset the 108Mbps SuperG Wireless Access Point to the Factory Default Settings, please do the following:

A. Locate the Reset button at the back of the 108Mbps SuperG Wireless Access Point. B. Use a paper clip to press the Reset button.

C. Hold for about 10 seconds and then release.

D. After the 108Mbps SuperG Wireless Access Point reboots (this may take a few seconds) it will be reset to the factory default settings.

30

Image 30

Contents Model # AP411W User’s Manual Table of Contents Package Contents IntroductionConnections Wireless Basics Installation Considerations Connecting the Access Point Establishing Wireless Connection Configuring the Access Point OptionalSsid default Select Internet Protocol TCP/IP and click Properties Click Close Page Page Web Configuration Utility Advanced Setup Configuration IP Address255.0.0.0 Configuration Device Information Configuration AP Mode Settings Configuration Wlan Parameter Settings Page Configuration Wlan Partition Configuration Access Control SettingsConfiguration Security Settings ControlKey Size WPA Mode Additional WPA settings Radius Server Required Management Administration Maintenance Update Firmware Management MiscMaintenance Configuration File Maintenance Restart SystemStatistics Page Troubleshooting Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Forgot my encryption key Reset Technical Specifications Device ManagementTechnical Support Receiver Sensitivity