Motorola XTNI manual Installing Spring Action Belt Clip, Battery Life Information

Page 18

BATTERIES AND CHARGERS

Installing Spring Action Belt Clip

belt clip tab

spring action belt clip

1.Slide the spring action belt clip rails into the belt clip grooves on the back of the battery pack and slide it down until the belt clip tab snaps into place.

2.To remove, pull back the metal release tab on the belt clip tab and push the spring action belt clip upward to remove.

Battery Life Information

Li-Ion Battery Life

Depending on the radio model and/or region the battery capacity will be different. This feature will determine the estimated battery life. When the Battery Save feature is ON (enabled by default) the battery life will be longer. The following chart summarizes battery life estimations:

Li-Ion Battery Life with Battery Save

feature ON

Battery	0.5 Watt
Standard	16 hours

High Capacity	32 hours

Note: Battery life is estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle.

English 16

Image 18

Contents Page Page Contents Hands Free without Accessories iVOX30 Accessories ContentsComputer Software Copyrights Computer Software CopyrightsSafety SafetyBatteries and Chargers Safety Information Batteries and Chargers Safety InformationOperational Safety Guidelines Radio Overview Parts of the RadioRadio Overview Radio OverviewModel Frequency Transmit Power Number Antenna Band Battery Features and Charging Options About the Li-Ion BatteryBatteries and Chargers Battery Recycling and Disposal Batteries and ChargersBattery Latchbattery latch Slots Removing Alkaline Batteries Turn OFF the radio, if it is turned onPower Supply, Adaptors and Drop-in Tray Charger Installing Spring Action Belt Clip Battery Life InformationCharging the Battery Charging with the Drop-in Tray Single Unit ChargerCharging a Stand-alone Battery Adjustable bracket Standard High and Ultra High Capacity Charging a High Capacity Battery Drop-in Tray Charger LED Indicators Standard Charger LED IndicatorEstimated Charging Time Status LED Status Comments Getting Started Receiving a Call Talk RangeGetting Started Radio LED Indicators Radio Status LED IndicationWith Compatible VOX Accessories HANDS-FREE USE/VOX Getting StartedBattery Save Hands Free without Accessories iVOXSetting VOX Sensitivity Microphone GainReset To Factory Defaults End of Transmission Tone Roger Beep ToneProgramming Features Programming ModeLearning To Read The Values The Radio Signals You Programming Mode Reading your Radios Features Values FeaturesProgramming Mode Programming FeaturesEntering Programming Mode Reading Frequencies ValuesFrequencies Saving Settings Reading Auto-Scan ValuesProgramming Frequencies, Codes and Auto-Scan Programming Mode FAQ Just programmed the value I wanted Example of Programming a Code Other Programming Features Scan Example of Programming Auto ScanEditing Scan List Nuisance Channel DeleteCPS Computer Programming Software Bandwidth Select Time-Out TimerBattery Type Setting Call TonesProgramming Features Cloning Radios Cloning with a Multi-Unit Charger MUCWhen ordering the MUC Press and release SB1Operating Instructions Cloning using the CPS Computer Programming Software What to do if cloning failsTroubleshooting TroubleshootingMonitoring’ Section on page 24 for further information Light does not come on USE and Care If the radio is submerged in waterUSE and Care Frequency and Code Charts Frequency and Code ChartsChannel Radios PMR 446 Defaults Ctcss CtcssDPL Codes DPL Code What is not Covered by the Warranty WarrantyWarranty Information Motorola LimitedMotorola Limited Warranty Accessories Chargers Page 6871663M06-A