Symptom | Try This | |
|
| |
| Make sure the PTT button is completely pressed if you're transmitting. | |
| Confirm radios have the same Channel, Frequency, Interference | |
| Eliminator Code and Scramble Code settings. Refer to the ‘Talking and | |
| Monitoring’ Section on page 24 for further information. | |
Message not | Recharge, replace and/or reposition batteries. Refer to ‘About your | |
Battery’ section on page 11. | ||
transmitted/received | ||
Obstructions and operating indoors, or in vehicles, may interfere: change | ||
| ||
| location. Refer to ‘Talking and Monitoring’ Section on page 24. | |
| Verify that the radio is not in Scan Mode. Refer to the ‘“Scan” on page 40 | |
| “CPS (Computer Programming Software)” on page 42 and “Nuisance | |
| Channel Delete” on page 41. | |
|
| |
Heavy static or | Radios are too close, they must be at least five feet apart. Radios are too | |
far apart or obstacles are interfering with transmission. Refer to the ‘Talking | ||
interference | ||
and Monitoring’ Section on page 24. | ||
| ||
| Recharge or replace | |
Low batteries | operating temperatures affect battery life. Refer to ‘About the | |
| Section on page 11. | |
|
|
TROUBLESHOOTING
49English