Motorola XTNI manual CPS Computer Programming Software

CPS (COMPUTER PROGRAMMING

SOFTWARE)

Radio to be programmed

		USB
Drop-in		Connector
Charger		CPS
Tray
	Mini-connector	Programming
		Cable

	The easiest way to program or change
	features in your radio is by using the Computer
	Programming Software (CPS) and the CPS
	Programming Cable(*).
	To do so, connect the XTNi radio via the Drop-
PROGRAMMING FEATURES	in Charger Tray and CPS Programming Cable
	Repeater/Talkaround, Bandwidth Select, Time-
	as shown in the picture above.
	The CPS allows the user to program
	frequencies, PL/DPL codes, as well as other
	features such as: Direct Frequency Input,
		42
English

out Timer, Power Select, Battery Type Select, Scan List, Call Tones, Scramble, Reverse Burst etc. CPS is a very useful tool as it can also lock the frontpanel radio programming or restrict any specific radio feature to be changed (to avoid preset radio values to be accidentally erased).

It also provides security by giving the option to set up a password for profile radio's management. Please refer to Features Summary Chart Section at the end of the User's Guide for more details.

Note: • Features should be enabled by an Authorized Motorola Dealer. Contact your Motorola Point of Purchase for details Note: (*) CPS Programming Cable is an accessory sold separately. For part number information refer to the Accessories Section.