ADTRAN Express XRT manual Windows NT 3.51 INF File Installation

Page 25

Chapter 2. Installation

Windows NT 3.51 INF File Installation

To install an ADTRAN Express XRT, use the following procedure:

1.Locate the modem.inf file. This file is normally located in the c:\winnt35\system32\ras directory. See the Windows NT documentation for instructions on installing the Remote Ac- cess Service.

2.In order to recover in case of a user mistake, create a backup of the modem.inf file.

3.Using Notepad or another text editor, open the adtran.inf file on the Express Configuration Wizard disk labeled Windows 95 and Windows NT.

4.Copy the contents of the adtran.inf file to the Windows clip- board.

5.Open the modem.inf file.

6.Paste the contents of the clipboard (adtran.inf) to the end of the modem.inf file.

7.Save the altered modem.inf file.

8.Close the modem.inf file.

9.Restart the system.

10.Go to Express Configuration Wizard Installation for Microsoft Win- dows 3.1 and Windows NT 3.51 on page 11.

The Express XRT can now be configured for use with the Remote Access Service.

Express Configuration Wizard Installation for Microsoft Windows 3.1 and Windows NT 3.51

The Express Configuration Wizard is a graphical user interface which allows you to configure and test the Express XRT with ease. Follow the installation procedure that applies to the operating system.

1.For Windows 3.1 operating systems, insert the ADTRAN Ex- press Configuration Wizard disk labeled Windows 3.1 into your 3.5" disk drive. For Windows NT 3.51, insert the disk la- beled Windows 95, Windows NT into your 3.5" disk drive.

2.In Windows Program Manager, select the Run... option under the File menu.

61202.153L3-1

Express XRT User Guide

11

Image 25

Contents User Guide Express XRTTrademarks Service Type Service Order Code Page Canadian Equipment Limitations Canadian Emissions RequirementsPage Page Page Nynex Telephone Company Contacts for Isdn ServicePage Table of Contents Installing an Analog Modem List of Figures List of Tables Figure B-1 Front Panel LEDsExpress XRT Overview Chapter OverviewGetting Started What You Provide Minimum RequirementsFor a PC For a MacintoshWhat Adtran Provides Express XRT ContentsOverview Installing the Adtran Express XRT Chapter InstallationVerify Switch Settings Dip Switches on Rear Panel Connecting the Express XRTGo to the Express XRT Software Installation section Express XRT Software InstallationStandard Isdn Internet/Remote Access Application Select Adtran Express XRT from the Drivers list Microsoft Windows 95 and Windows NT Windows 95 Plug and PlaySelect Adtran Express XRT from the Drivers list Go to the section Using the Express Configuration Wizard on Installation OptionsGet On With It Microsoft Windows 3.1 and Windows NTWindows NT 3.51 INF File Installation Double-click the Express Configuration Installer icon Macintosh InstallationSupplementary Voice Services Basic Telephone ServiceCall Waiting Conference CallingSingle Phone Number Operation Phone Number AllocationAutomatic Redial For Windows 95 and WIndows NT Using the Express Configuration WizardFor WIndows 3.x and WIndows NT For the Macintosh operating systemExpress Configuration Automatic Guide option Installation Express Configuration Wizard Connection Tab Auto-Detect SPIDs/Switch Type Expert IsdnThis option only applies to North American switches Auto-Detect buttonExpress Configuration Wizard Tray Tool Using the Express Configuration Wizard HelpPreferences Tab Express Configuration Wizard Tray ToolExpress XRT Enabled, External Analog Modem Disabled Express XRT Disabled, External Analog Modem EnabledUnknown State Enable/Disable Modem Express Configuration Tray Tool MenuProperties RefreshExit Installing Windows 95 Dial-Up NetworkingVT 100 Terminal Emulation VT 100 ConfigurationVT 100 Terminal Status Buffer VT 100 Terminal Configuration MenuVT 100 Terminal Status Buffer Menu External Analog Modem Application Installing an Analog ModemExternal Analog Modem Application Connecting an External Analog ModemClick Connect External Modem Installing a New External Analog ModemSelect Dont detect my modem I will select it from a list Have DiskRequired External Analog Modem Settings Configuring an External Analog ModemControlling an External Analog Modem Express Configuration Wizard Modem EnableNo Modem Attached Error Message Express Configuration Wizard Connecting an External ModemTerminal Emulation Modem Enable Express Configuration Wizard Modem DisableDEM Found HyperACCESS Enabling an External Analog Modem HyperACCESS Verifying External Modem ConnectionHyperACCESS Disabling an External Analog Modem Terminal Emulation Modem DisableInternal Analog Modem Application Internal Analog Modem Application Connecting an Internal Analog ModemFactory Default Configuration Chapter Application ConfigurationFactory PPP 64k Internet Profile ConfigurationsFactory Multilink PPP 128k Internet Starting the Express Configuration Wizard Software Express Configuration WizardFactory V.120 64k Remote Access Factory Async Bonding 128k Remote AccessCreating a Custom Profile Internet and Remote AccessIsdn Setup Tab Defining a User Program Button Protocol TabAdvanced Tab Calling Features Options Inactivity TimerCalling Features Tab Message Waiting IndicatorEnable Call Rejection List Flash/Hook DefaultEnable Anonymous Call Rejection Incoming Voice Call OptionsBBS Applications Defining a Custom HyperACCESS SessionShiva Password Authentication Protocol Spap Application Configuration Chapter Upgrading Software Express Configuration WizardDiagnostics Tab HyperACCESS Send Dialog Box Troubleshooting Guidelines Chapter TroubleshootingPower/Line LED is Off Power/Line LED Flashes and B1 and B2 LEDs are OffPower/Line LED, B1, and B2 LEDs Flash Green Auto-detect Switch/SPIDs Remains at Link Down Dial-Up Connection ProblemsExpress XRT Not Detected Auto-detect is only used in North AmericaDifficulty with 230.4 kbps Operation External Analog Modem Not DetectedDial-Up Networking Difficulty AT Commands Appendix a AT Commands and S-RegistersUsing S-Registers Using an AT CommandReading an S-Register Reading an S-Register StringCommand Function Dialing a Call using the AT Command ProcessorChanging a String S-Register Carrier Detect CD Control Line Options Clear-To-Send CTS Control Line Options AT Command Response Message Types S8 Call Rejection Register ListS12 Escape Time S14 Misc Bits PPP ModeAsync Bond INGDTE DSR DTE RTSDTE CD DTE DTRBond Txfa Switch TypeBond Txadd Bond TxdeqSPID1 LOC S53 Call Type S54 Protocol S58 Call Screen INGSPID2 LOC LDN1 LOCDTE Stop DTE ParityDTE Flow RemoteLocal Tones S93 Call Type RoutingCountry CR0 LOCAppendix A. AT Commands and S-Registers LEDs Appendix B LEDsFront Panel LEDs Table B-ANorth America a ﬂashing light Appendix C Status Buffer Messages AccessinfodiscardedBearcapnotavail BadinfoelemBearercapnotauth Bonding +/-XXXCallrejected BusyChandoesnotexist ChannotimplementedDestoutoforder Dest not IsdnFacilitynotsubscribed FacilitynotimplementFacilityrejected ID =Invalidmsgunspec InvalidelemcontentsInvalidnumberformat LDN TOO LongNetworkoutoforder NetworkcongestionNocircuitavailable NonexistentmsgPPP Compression UP ProtocolerrorPPP Link Loopback ReqchannelnotavailTimerexpiry ServicenotavailSource not Isdn TemporaryfailureWrongmessage V120 TimeoutWrongmsgforstate Appendix D Loop Status Messages PPP YyyyRate adaption protocol V120Appendix D. Loop Status Messages RS-232 Interface Appendix E Connector PinoutsTable E-A Pin Name DescriptionData Terminal Ready Ring Indicator= Input O = Output Modem InterfaceRJ-11 Pots Port Interface Table E-CTable E-D RJ-45 Isdn Line InterfaceExpress XRT Ground Pinouts Figure E-3Numerics IndexINF Index Index Do not STAPLE. Registration form inside Express XRT Warranty Registration Card Pre-Sales Inquiries and Application Support On-Line ServicesPost-Sales Support