ADTRAN Express XRT manual Installing an Analog Modem, External Analog Modem Application

Page 41

Chapter 3 Installing an Analog Modem

An external or internal analog modem can be connected to the Ex- press XRT to access an Internet provider, BBS, or host server that does not support ISDN.

EXTERNAL ANALOG MODEM APPLICATION

In order to connect an external analog modem to the Express XRT, the following items are necessary:

•External analog modem

•RS-232 serial cable

•RJ-11 to RJ-11 telephone cable

Incoming calls must use ISDN phone number 2 for external analog ap- plications.

In addition to the RS-232 cable connecting the Express XRT to the PC, a separate RS-232 cable is required to connect an external an- alog modem to the Express XRT. This RS-232 cable is not sup- plied.

Figure 3-1 on page 28 illustrates an external analog modem con- nected to the Express XRT. This setup requires only one PC COM port, and supports DTE rates of up to 115.2 kbps.

61202.153L3-1

Express XRT User Guide

27

Page 40 Page 42
Image 41
Page 40 Page 42
Contents User Guide Express XRTTrademarks Service Type Service Order Code Page Canadian Equipment Limitations Canadian Emissions RequirementsPage Page Page Nynex Telephone Company Contacts for Isdn ServicePage Table of Contents Installing an Analog Modem List of Figures List of Tables Figure B-1 Front Panel LEDsGetting Started Chapter OverviewExpress XRT Overview What You Provide Minimum RequirementsFor a PC For a MacintoshWhat Adtran Provides Express XRT ContentsOverview Verify Switch Settings Chapter InstallationInstalling the Adtran Express XRT Dip Switches on Rear Panel Connecting the Express XRTStandard Isdn Internet/Remote Access Application Express XRT Software InstallationGo to the Express XRT Software Installation section Select Adtran Express XRT from the Drivers list Microsoft Windows 95 and Windows NT Windows 95 Plug and PlaySelect Adtran Express XRT from the Drivers list Go to the section Using the Express Configuration Wizard on Installation OptionsGet On With It Microsoft Windows 3.1 and Windows NTWindows NT 3.51 INF File Installation Double-click the Express Configuration Installer icon Macintosh InstallationSupplementary Voice Services Basic Telephone ServiceCall Waiting Conference CallingAutomatic Redial Phone Number AllocationSingle Phone Number Operation For Windows 95 and WIndows NT Using the Express Configuration WizardFor WIndows 3.x and WIndows NT For the Macintosh operating systemExpress Configuration Automatic Guide option Installation Express Configuration Wizard Connection Tab Auto-Detect SPIDs/Switch Type Expert IsdnThis option only applies to North American switches Auto-Detect buttonExpress Configuration Wizard Tray Tool Using the Express Configuration Wizard HelpPreferences Tab Express Configuration Wizard Tray ToolUnknown State Express XRT Disabled, External Analog Modem EnabledExpress XRT Enabled, External Analog Modem Disabled Enable/Disable Modem Express Configuration Tray Tool MenuProperties RefreshExit Installing Windows 95 Dial-Up NetworkingVT 100 Terminal Emulation VT 100 ConfigurationVT 100 Terminal Status Buffer VT 100 Terminal Configuration MenuVT 100 Terminal Status Buffer Menu External Analog Modem Application Installing an Analog ModemExternal Analog Modem Application Connecting an External Analog ModemClick Connect External Modem Installing a New External Analog ModemSelect Dont detect my modem I will select it from a list Have DiskRequired External Analog Modem Settings Configuring an External Analog ModemControlling an External Analog Modem Express Configuration Wizard Modem EnableNo Modem Attached Error Message Express Configuration Wizard Connecting an External ModemDEM Found Express Configuration Wizard Modem DisableTerminal Emulation Modem Enable HyperACCESS Enabling an External Analog Modem HyperACCESS Verifying External Modem ConnectionInternal Analog Modem Application Terminal Emulation Modem DisableHyperACCESS Disabling an External Analog Modem Internal Analog Modem Application Connecting an Internal Analog ModemFactory Default Configuration Chapter Application ConfigurationFactory Multilink PPP 128k Internet Profile ConfigurationsFactory PPP 64k Internet Starting the Express Configuration Wizard Software Express Configuration WizardFactory V.120 64k Remote Access Factory Async Bonding 128k Remote AccessCreating a Custom Profile Internet and Remote AccessIsdn Setup Tab Defining a User Program Button Protocol TabAdvanced Tab Calling Features Options Inactivity TimerCalling Features Tab Message Waiting IndicatorEnable Call Rejection List Flash/Hook DefaultEnable Anonymous Call Rejection Incoming Voice Call OptionsBBS Applications Defining a Custom HyperACCESS SessionShiva Password Authentication Protocol Spap Application Configuration Chapter Upgrading Software Express Configuration WizardDiagnostics Tab HyperACCESS Send Dialog Box Troubleshooting Guidelines Chapter TroubleshootingPower/Line LED is Off Power/Line LED Flashes and B1 and B2 LEDs are OffPower/Line LED, B1, and B2 LEDs Flash Green Auto-detect Switch/SPIDs Remains at Link Down Dial-Up Connection ProblemsExpress XRT Not Detected Auto-detect is only used in North AmericaDial-Up Networking Difficulty External Analog Modem Not DetectedDifficulty with 230.4 kbps Operation AT Commands Appendix a AT Commands and S-RegistersUsing S-Registers Using an AT CommandReading an S-Register Reading an S-Register StringChanging a String S-Register Dialing a Call using the AT Command ProcessorCommand Function Carrier Detect CD Control Line Options Clear-To-Send CTS Control Line Options AT Command Response Message Types S8 Call Rejection Register ListS12 Escape Time S14 Misc Bits PPP ModeAsync Bond INGDTE DSR DTE RTSDTE CD DTE DTRBond Txfa Switch TypeBond Txadd Bond TxdeqSPID1 LOC S53 Call Type S54 Protocol S58 Call Screen INGSPID2 LOC LDN1 LOCDTE Stop DTE ParityDTE Flow RemoteLocal Tones S93 Call Type RoutingCountry CR0 LOCAppendix A. AT Commands and S-Registers LEDs Appendix B LEDsFront Panel LEDs Table B-ANorth America a flashing light Appendix C Status Buffer Messages AccessinfodiscardedBearcapnotavail BadinfoelemBearercapnotauth Bonding +/-XXXCallrejected BusyChandoesnotexist ChannotimplementedDestoutoforder Dest not IsdnFacilitynotsubscribed FacilitynotimplementFacilityrejected ID =Invalidmsgunspec InvalidelemcontentsInvalidnumberformat LDN TOO LongNetworkoutoforder NetworkcongestionNocircuitavailable NonexistentmsgPPP Compression UP ProtocolerrorPPP Link Loopback ReqchannelnotavailTimerexpiry ServicenotavailSource not Isdn TemporaryfailureWrongmsgforstate V120 TimeoutWrongmessage Appendix D Loop Status Messages PPP YyyyRate adaption protocol V120Appendix D. Loop Status Messages RS-232 Interface Appendix E Connector PinoutsTable E-A Pin Name DescriptionData Terminal Ready Ring Indicator= Input O = Output Modem InterfaceRJ-11 Pots Port Interface Table E-CTable E-D RJ-45 Isdn Line InterfaceExpress XRT Ground Pinouts Figure E-3Numerics IndexINF Index Index Do not STAPLE. Registration form inside Express XRT Warranty Registration Card Post-Sales Support On-Line ServicesPre-Sales Inquiries and Application Support
Top Page Image Contents