Chapter 4
Application Configuration
There are three methods available for configuring the Express XRT: Express Configuration Wizard, VT 100 terminal, or AT Commands.
Before configuring the Express XRT for any application, the Ex- press XRT should be connected correctly for the application as de- scribed in the chapter Installation on page 5.
Some features in the Express XRT do not take effect upon selec- tion. This prevents unintentional reconfiguration of the Express XRT during an active call. Items such as Bit Rate, Protocol, and Call Type take effect only at the beginning of a new call.
Technical notes, documents and scripts can be found on the ADT- RAN web home page at http://www.adtran.com under the Infor- mation Desk. These provide information on how to use ADTRAN products in specific applications on PC and Macintosh platforms.
FACTORY DEFAULT CONFIGURATION
The Express XRT is shipped configured as follows:
Disabled | |
Switch Type | Euro ISDN |
Call Type | Data 64K |
Auto Answer | Enabled |
Call Screening | Answer Any |
Call Routing | Speech/Audio calls to POTS |
Express XRT User Guide | 37 |