ADTRAN Express XRT manual

Page 6

The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device, to prevent overloading. The termina- tion on a loop may consist of any combination of devices subject only to the requirement that the total of the Load Numbers of all devices does not exceed 100.

WARRANTY: ADTRAN warrants that items manufactured by ADTRAN and supplied under Buyer’s order shall be free from de- fects in materials and workmanship and will conform to applica- ble specifications and drawings. ADTRAN’s liability herein, whether based upon breach of warranty or contract or negligence in manufacture, shall be limited to replacement or repair at ADT- RAN’s election of all such defective or nonconforming items, pro- vided that this warranty shall apply only where Buyer has given ADTRAN written notice of such defects or nonconformity within five (5) years* after delivery by ADTRAN of such items to Buyer. ADTRAN shall have the right prior to return to inspect at Buyer’s plant any items claimed to be defective or nonconforming.

*Note: The following items carry warranty period as shown.

1.Items not of ADTRAN manufacture will carry the remaining warranty and related terms and conditions of the original manufacturer.

2.Encapsulated U-Repeater and Encapsulated DDS Repeater - 2 years.

The foregoing constitutes the sole and exclusive remedy of the Buyer and exclusive liability of ADTRAN AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED OR IM- PLIED OR STATUTORY AS TO MERCHANTABILITY, FITNESS FOR PURPOSE SOLD, DESCRIPTION, QUALITY, PRODUC- TIVENESS OR ANY OTHER MATTER. Without limiting the fore- going, in no event shall ADTRAN be liable for the loss of use or profit or other collateral, special or consequential damages.

RETURNS: Return authorization must be obtained from ADT- RAN prior to return of any items, including those for repair. Buy- er’s right to repair or replacement are governed by this Warranty. Issuance of credit for returned items shall be made at ADTRAN’s discretion upon Buyer’s request. All returns for credit accepted by ADTRAN are subject to a restocking fee.

Image 6
Contents Express XRT User GuideTrademarks Service Type Service Order Code Page Canadian Emissions Requirements Canadian Equipment LimitationsPage Page Page Telephone Company Contacts for Isdn Service NynexPage Table of Contents Installing an Analog Modem List of Figures Figure B-1 Front Panel LEDs List of TablesChapter Overview Express XRT OverviewGetting Started For a PC Minimum RequirementsWhat You Provide For a MacintoshExpress XRT Contents What Adtran ProvidesOverview Chapter Installation Installing the Adtran Express XRTVerify Switch Settings Connecting the Express XRT Dip Switches on Rear PanelExpress XRT Software Installation Go to the Express XRT Software Installation sectionStandard Isdn Internet/Remote Access Application Microsoft Windows 95 and Windows NT Windows 95 Plug and Play Select Adtran Express XRT from the Drivers listSelect Adtran Express XRT from the Drivers list Get On With It Installation OptionsGo to the section Using the Express Configuration Wizard on Microsoft Windows 3.1 and Windows NTWindows NT 3.51 INF File Installation Macintosh Installation Double-click the Express Configuration Installer iconCall Waiting Basic Telephone ServiceSupplementary Voice Services Conference CallingPhone Number Allocation Single Phone Number OperationAutomatic Redial For WIndows 3.x and WIndows NT Using the Express Configuration WizardFor Windows 95 and WIndows NT For the Macintosh operating systemExpress Configuration Automatic Guide option Installation This option only applies to North American switches Auto-Detect SPIDs/Switch Type Expert IsdnExpress Configuration Wizard Connection Tab Auto-Detect buttonUsing the Express Configuration Wizard Help Express Configuration Wizard Tray ToolExpress Configuration Wizard Tray Tool Preferences TabExpress XRT Disabled, External Analog Modem Enabled Express XRT Enabled, External Analog Modem DisabledUnknown State Properties Express Configuration Tray Tool MenuEnable/Disable Modem RefreshInstalling Windows 95 Dial-Up Networking ExitVT 100 Configuration VT 100 Terminal EmulationVT 100 Terminal Configuration Menu VT 100 Terminal Status BufferVT 100 Terminal Status Buffer Menu Installing an Analog Modem External Analog Modem ApplicationConnecting an External Analog Modem External Analog Modem ApplicationSelect Dont detect my modem I will select it from a list Installing a New External Analog ModemClick Connect External Modem Have DiskConfiguring an External Analog Modem Required External Analog Modem SettingsExpress Configuration Wizard Modem Enable Controlling an External Analog ModemExpress Configuration Wizard Connecting an External Modem No Modem Attached Error MessageExpress Configuration Wizard Modem Disable Terminal Emulation Modem EnableDEM Found HyperACCESS Verifying External Modem Connection HyperACCESS Enabling an External Analog ModemTerminal Emulation Modem Disable HyperACCESS Disabling an External Analog ModemInternal Analog Modem Application Connecting an Internal Analog Modem Internal Analog Modem ApplicationChapter Application Configuration Factory Default ConfigurationProfile Configurations Factory PPP 64k InternetFactory Multilink PPP 128k Internet Factory V.120 64k Remote Access Express Configuration WizardStarting the Express Configuration Wizard Software Factory Async Bonding 128k Remote AccessInternet and Remote Access Creating a Custom ProfileIsdn Setup Tab Protocol Tab Defining a User Program ButtonAdvanced Tab Calling Features Tab Inactivity TimerCalling Features Options Message Waiting IndicatorEnable Anonymous Call Rejection Flash/Hook DefaultEnable Call Rejection List Incoming Voice Call OptionsDefining a Custom HyperACCESS Session BBS ApplicationsShiva Password Authentication Protocol Spap Application Configuration Express Configuration Wizard Chapter Upgrading SoftwareDiagnostics Tab HyperACCESS Send Dialog Box Power/Line LED is Off Chapter TroubleshootingTroubleshooting Guidelines Power/Line LED Flashes and B1 and B2 LEDs are OffPower/Line LED, B1, and B2 LEDs Flash Green Express XRT Not Detected Dial-Up Connection ProblemsAuto-detect Switch/SPIDs Remains at Link Down Auto-detect is only used in North AmericaExternal Analog Modem Not Detected Difficulty with 230.4 kbps OperationDial-Up Networking Difficulty Appendix a AT Commands and S-Registers AT CommandsReading an S-Register Using an AT CommandUsing S-Registers Reading an S-Register StringDialing a Call using the AT Command Processor Command FunctionChanging a String S-Register Carrier Detect CD Control Line Options Clear-To-Send CTS Control Line Options AT Command Response Message Types Register List S8 Call RejectionAsync Bond PPP ModeS12 Escape Time S14 Misc Bits INGDTE CD DTE RTSDTE DSR DTE DTRBond Txadd Switch TypeBond Txfa Bond TxdeqSPID2 LOC S53 Call Type S54 Protocol S58 Call Screen INGSPID1 LOC LDN1 LOCDTE Flow DTE ParityDTE Stop RemoteCountry S93 Call Type RoutingLocal Tones CR0 LOCAppendix A. AT Commands and S-Registers Front Panel LEDs Appendix B LEDsLEDs Table B-ANorth America a flashing light Accessinfodiscarded Appendix C Status Buffer MessagesBearercapnotauth BadinfoelemBearcapnotavail Bonding +/-XXXChandoesnotexist BusyCallrejected ChannotimplementedDest not Isdn DestoutoforderFacilityrejected FacilitynotimplementFacilitynotsubscribed ID =Invalidnumberformat InvalidelemcontentsInvalidmsgunspec LDN TOO LongNocircuitavailable NetworkcongestionNetworkoutoforder NonexistentmsgPPP Link Loopback ProtocolerrorPPP Compression UP ReqchannelnotavailSource not Isdn ServicenotavailTimerexpiry TemporaryfailureV120 Timeout WrongmessageWrongmsgforstate Appendix D Loop Status Messages Yyyy PPPV120 Rate adaption protocolAppendix D. Loop Status Messages Table E-A Appendix E Connector PinoutsRS-232 Interface Pin Name Description= Input O = Output Ring IndicatorData Terminal Ready Modem InterfaceTable E-D Table E-CRJ-11 Pots Port Interface RJ-45 Isdn Line InterfaceFigure E-3 Express XRT Ground PinoutsIndex NumericsINF Index Index Do not STAPLE. Registration form inside Express XRT Warranty Registration Card On-Line Services Pre-Sales Inquiries and Application SupportPost-Sales Support