3Com 3C589D manual You must supply your own BNC T-connector

Page 15

Connecting the LAN PC Cards

2-3

aAttach one RJ-45 network cable to the RJ-45 port on the PC Card COMBO cable.

bInsert the other RJ-45 connector into the network port.

cSlide the PC Card all the way into the PC Card slot.

4If you are connecting the 3C589D-COMBO PC Card, for 10BASE2 connections, connect the PC Card COMBO cable to the PC Card.

You must supply your own BNC T-connector.

aConnect the BNC T-connector to the PC Card COMBO cable port.

bConnect the BNC T-connector to the network cable.

cSlide the PC Card all the way into the PC Card slot.

CAUTION: Do not force the PC Card into the slot or you may bend the pins inside the slot.

Image 15

Contents LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Introduction ContentTroubleshooting Glossary Index FCC Class B Certification Statement CE Notice How to Use This Guide About this GuideIntroduction Convention Description Conventions13C589D PC Card Introduction23CXE589DC LAN PC Card Requirements FeaturesTroubleshooting Network Driver Installation Options Transcend PC Link SmartAgent Support Card ServicesPC C ARD Connecting the LAN PC Cards You must supply your own BNC T-connector 4CHAPTER 2 Installing the LAN PC Card Connecting the LAN PC Cards Windows Installing the Network DriverBefore You Install the Network Driver Which Driver Installation Instructions Should You Use?Which Windows 95 Version Are You Running? Click OK to copy the manufacturers ﬁles from A\ Restart the PC to login to the networkWindows 95 Version 4.00.950A Windows 95 Version 4.00.95BRemove the EtherDisk diskette and click Yes Click Finish to accept the driverWindows NT Conﬁrming InstallationWindows NT 4 Installation without Networking Installed Place a checkmark in the Wired to the network boxClick Next to continue Click Next Enter the settings for the PC cardSelect the transport appropriate for the network client Windows NT 4 Installation with Networking InstalledSelect Other Requires disk from manufacturer from the list Windows NT VersionMicrosoft Windows for Workgroups WFW Before You Begin Installing the Network DriverUsing the Windows menu, select Network Network Setup dialog box, select the Networks... buttonAutoLink for Windows 3.x, Windows for Workgroups, and DOS To display the ﬁle, type Network Text File Name Network Driver Name Operating System Supported Network DriversTroubleshooting Testing the 3C589D PC Card Avoiding Memory Manager Conﬂicts Troubleshooting Tips \Type AutoLink.Log More Enter Option Default Setting Available Settings Changing Configuration SettingsHighlight the 3Com EtherLink III LAN PC Card Changing Power Management with WindowsChanging Conﬁgurations Settings with DOS Click the Control Panel icon Click SystemsConﬁguration Settings Descriptions CIS Memory AddressBase Address Network Driver Optimization Power ManagementInterrupt Request Level Transceiver TypeVerifying That Card Services Is Installed Using the 3C589D PC Card Without Card ServicesAvoiding Memory Manager Conﬂicts 2APPENDIX a about Card Services Speciﬁcations SpecificationsPower Requirements Glossary Transceiver Socket ServicesPC Card SocketNumbers IndexIndex FCC Class B Certiﬁcation Statement CE Notice