3Com 3C589D manual Windows 95 Version 4.00.950A, Windows 95 Version 4.00.95B

Page 20

Windows 95 Version 4.00.950A

3-3

Windows 95 Version 4.00.950A

This section describes how to install the NDIS network driver when your notebook is running Windows 95 4.00.950A.

1Make sure the CardBus PC Card is installed and connected to the network, as described in Chapter 2.

The New Hardware Found window appears and states that it has detected the 3Com Corporation 3C589D PC Card.

2Insert the EtherDisk diskette.

3Select Driver from Disk provided by manufacturer and click OK.

The Install from Disk window appears.

4Click OK to copy the manufacturers ﬁles from A:\.

If Windows 95 ﬁles are requested, enter the path to the ﬁles (typically C:\windows\options\cabs)and click OK.

The 3C598D nework driver installation is complete.

5Restart the PC to login to the network.

Windows 95 Version 4.00.95B

1Insert the PC Card in either PC Card slot in your PC as described in Chapter 2.

The Update Device Driver wizard window appears and states that it has detected the 3Com LAN PC Card.

2Insert the EtherDisk diskette and click Next to begin driver installation.

The following message appears: "Windows found the

following updated driver for this device: 3Com EtherLink III PCMCIA (3C589D)".

Image 20

Contents LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Content IntroductionTroubleshooting Glossary Index FCC Class B Certification Statement CE Notice Introduction How to Use This GuideAbout this Guide Conventions Convention DescriptionIntroduction 13C589D PC Card23CXE589DC LAN PC Card Features RequirementsNetwork Driver Installation Options TroubleshootingCard Services Transcend PC Link SmartAgent SupportPC C ARD Connecting the LAN PC Cards You must supply your own BNC T-connector 4CHAPTER 2 Installing the LAN PC Card Connecting the LAN PC Cards Installing the Network Driver Before You Install the Network DriverWhich Driver Installation Instructions Should You Use? WindowsWhich Windows 95 Version Are You Running? Restart the PC to login to the network Windows 95 Version 4.00.950AWindows 95 Version 4.00.95B Click OK to copy the manufacturers ﬁles from A\Click Finish to accept the driver Remove the EtherDisk diskette and click YesConﬁrming Installation Windows NTClick Next to continue Windows NT 4 Installation without Networking InstalledPlace a checkmark in the Wired to the network box Enter the settings for the PC card Click NextWindows NT 4 Installation with Networking Installed Select the transport appropriate for the network clientWindows NT Version Select Other Requires disk from manufacturer from the listMicrosoft Windows for Workgroups WFW Installing the Network Driver Using the Windows menu, select NetworkNetwork Setup dialog box, select the Networks... button Before You BeginAutoLink for Windows 3.x, Windows for Workgroups, and DOS To display the ﬁle, type Supported Network Drivers Network Text File Name Network Driver Name Operating SystemTroubleshooting Testing the 3C589D PC Card Avoiding Memory Manager Conﬂicts Troubleshooting Tips \Type AutoLink.Log More Enter Changing Configuration Settings Option Default Setting Available SettingsChanging Power Management with Windows Changing Conﬁgurations Settings with DOSClick the Control Panel icon Click Systems Highlight the 3Com EtherLink III LAN PC CardBase Address Conﬁguration Settings DescriptionsCIS Memory Address Power Management Interrupt Request LevelTransceiver Type Network Driver OptimizationAvoiding Memory Manager Conﬂicts Verifying That Card Services Is InstalledUsing the 3C589D PC Card Without Card Services 2APPENDIX a about Card Services Specifications SpeciﬁcationsPower Requirements Glossary Socket Services PC CardSocket TransceiverIndex NumbersIndex FCC Class B Certiﬁcation Statement CE Notice