3Com 3C589D manual Windows NT Version, Select Other Requires disk from manufacturer from the list

Page 26

Windows NT

3-9

12Click on the close button to save and exit the Network setup area.

13Remove the EtherDisk diskette from drive A and restart the PC.

The driver installation is complete. To confirm installation, double-click the Network icon in the Control Panel. Click the Adapters tab. If the 3C589D does not appear on the list, see Chapter 4 for troubleshooting procedures.

Windows NT Version 3.51

1Make sure the PC Card is installed and connected to the network, as described in Chapter 2.

2In the Main group, select Control Panel.

3On the Control panel, double-click the Network icon and click on the Add Adapter tab.

a If Windows NT networking is not installed, click Yes to install Windows NT networking.

The Windows NT Setup window appears.

b Enter the directory name where the Windows NT installation files are located.

cClick Do Not Detect.

Windows NT does not fully support Plug and Play and cannot detect the 3C589D PC Card.

dClick Continue.

The Add Network Adapter window appears.

4Select Other Requires disk from manufacturer from the list.

5Click the Continue button.

6Insert the EtherDisk diskette into drive A and type: a:\ [Enter]

7Click OK.

8Select 3Com 3C589D EtherLink III LAN PC Card from the list and click OK.

The 3C589D files are copied to your PC.

Image 26
Contents LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Content IntroductionTroubleshooting Glossary Index FCC Class B Certification Statement CE Notice Introduction How to Use This GuideAbout this Guide Conventions Convention DescriptionIntroduction 13C589D PC Card23CXE589DC LAN PC Card Features RequirementsNetwork Driver Installation Options TroubleshootingCard Services Transcend PC Link SmartAgent SupportPC C ARD Connecting the LAN PC Cards You must supply your own BNC T-connector 4CHAPTER 2 Installing the LAN PC Card Connecting the LAN PC Cards Which Driver Installation Instructions Should You Use? Installing the Network DriverBefore You Install the Network Driver WindowsWhich Windows 95 Version Are You Running? Windows 95 Version 4.00.95B Restart the PC to login to the networkWindows 95 Version 4.00.950A Click OK to copy the manufacturers files from A\Click Finish to accept the driver Remove the EtherDisk diskette and click YesConfirming Installation Windows NTClick Next to continue Windows NT 4 Installation without Networking InstalledPlace a checkmark in the Wired to the network box Enter the settings for the PC card Click NextWindows NT 4 Installation with Networking Installed Select the transport appropriate for the network clientWindows NT Version Select Other Requires disk from manufacturer from the listMicrosoft Windows for Workgroups WFW Network Setup dialog box, select the Networks... button Installing the Network DriverUsing the Windows menu, select Network Before You BeginAutoLink for Windows 3.x, Windows for Workgroups, and DOS To display the file, type Supported Network Drivers Network Text File Name Network Driver Name Operating SystemTroubleshooting Testing the 3C589D PC Card Avoiding Memory Manager Conflicts Troubleshooting Tips \Type AutoLink.Log More Enter Changing Configuration Settings Option Default Setting Available SettingsClick the Control Panel icon Click Systems Changing Power Management with WindowsChanging Configurations Settings with DOS Highlight the 3Com EtherLink III LAN PC CardBase Address Configuration Settings DescriptionsCIS Memory Address Transceiver Type Power ManagementInterrupt Request Level Network Driver OptimizationAvoiding Memory Manager Conflicts Verifying That Card Services Is InstalledUsing the 3C589D PC Card Without Card Services 2APPENDIX a about Card Services Specifications SpecificationsPower Requirements Glossary Socket Socket ServicesPC Card TransceiverIndex NumbersIndex FCC Class B Certification Statement CE Notice