3Com 3C589D manual Changing Configuration Settings, Option Default Setting Available Settings

Page 37

CHANGING CONFIGURATION

5 SETTINGS

This chapter describes how to display and change the PC Card configuration settings by using the supplied DOS configuration program.

The DOS configuration runs under DOS and at a DOS prompt in a PC with Windows 95 installed.

Table 5-1 lists each software option, the default setting, and the other available settings. For a detailed description of these settings, see Configuration Settings Descriptions at the end of this chapter.

.

Table 5-1Option Settings

Option

Default Setting

Available Settings

 

 

 

CIS Memory Address

Assigned by Card

4 K contiguous block of memory

 

Services

 

I/O Base Address

Assigned by Card

200h, 210h, 220h, 230h, 240h,

 

Services

250h, 260h, 270h, 280h, 290h,

 

 

2A0h, 2B0h, 2C0h, 2D0h, 2E0h,

 

 

2F0h, 300h, 310h, 320h, 330h,

 

 

340h, 350h, 360h, 370h, 380h,

 

 

390h, 3A0h

Interrupt Request Level

Assigned by Card

3, 5, 7, 9, 10, 11, 12, 15

 

Services

 

Transceiver Type

Auto-Sense

Auto-Sense, Twisted-Pair, or Coax

Network Driver

Windows or

DOS client, Windows client, or OS/2

Optimization

OS/2 client

client or server

Power Management

Enabled

Enabled, disabled

 

 

 

Image 37
Contents LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Introduction ContentTroubleshooting Glossary Index FCC Class B Certification Statement CE Notice About this Guide How to Use This GuideIntroduction Convention Description Conventions13C589D PC Card Introduction23CXE589DC LAN PC Card Requirements FeaturesTroubleshooting Network Driver Installation OptionsTranscend PC Link SmartAgent Support Card ServicesPC C ARD Connecting the LAN PC Cards You must supply your own BNC T-connector 4CHAPTER 2 Installing the LAN PC Card Connecting the LAN PC Cards Before You Install the Network Driver Installing the Network DriverWhich Driver Installation Instructions Should You Use? WindowsWhich Windows 95 Version Are You Running? Windows 95 Version 4.00.950A Restart the PC to login to the networkWindows 95 Version 4.00.95B Click OK to copy the manufacturers files from A\Remove the EtherDisk diskette and click Yes Click Finish to accept the driverWindows NT Confirming InstallationPlace a checkmark in the Wired to the network box Windows NT 4 Installation without Networking InstalledClick Next to continue Click Next Enter the settings for the PC cardSelect the transport appropriate for the network client Windows NT 4 Installation with Networking InstalledSelect Other Requires disk from manufacturer from the list Windows NT VersionMicrosoft Windows for Workgroups WFW Using the Windows menu, select Network Installing the Network DriverNetwork Setup dialog box, select the Networks... button Before You BeginAutoLink for Windows 3.x, Windows for Workgroups, and DOS To display the file, type Network Text File Name Network Driver Name Operating System Supported Network DriversTroubleshooting Testing the 3C589D PC Card Avoiding Memory Manager Conflicts Troubleshooting Tips \Type AutoLink.Log More Enter Option Default Setting Available Settings Changing Configuration SettingsChanging Configurations Settings with DOS Changing Power Management with WindowsClick the Control Panel icon Click Systems Highlight the 3Com EtherLink III LAN PC CardCIS Memory Address Configuration Settings DescriptionsBase Address Interrupt Request Level Power ManagementTransceiver Type Network Driver OptimizationUsing the 3C589D PC Card Without Card Services Verifying That Card Services Is InstalledAvoiding Memory Manager Conflicts 2APPENDIX a about Card Services Specifications SpecificationsPower Requirements Glossary PC Card Socket ServicesSocket TransceiverNumbers IndexIndex FCC Class B Certification Statement CE Notice