
More Transmission Functions
ECM (Error Correction Mode)
This feature automatically sends data that was not transmitted successfully using a system that complies with in- ternational standards.
ECM requires that the destination machine has the same feature.
Parallel Memory Transmission
This function dials while the original is being scanned. Standard Memory Transmission stores the original in memory, then dials the destination. Parallel Memory Transmission al- lows you to quickly determine whether a connection was made. In addition, this function scans the orig- inal faster than Immediate Transmis- sion and is useful when you are in a hurry and need to use the original for another purpose.
Note
❒By default this feature is turned on. You can change this with the User Parameters. See P.72 “User Parame- ters” (Switch07, Bit2).
Limitation
❒Standard Memory Transmission is used instead of Parallel Memory Transmission in the following cas- es.
•When the line is busy and could not be connected to
•With Send Later
•With Transfer Request
•When you store an original for Memory Transmission while an- other communicati on is in progress
•When two or more destinations are specified
•When the original is set on the ex- posure glass
Note
❒If you press the {Clear/Stop} key, the original jams, or memory be- comes full during Parallel Memory
Transmission, the machine stops transmitting and prints the Com- munication Result Report. The file 3 is erased.
❒Total stored page numbers are not printed in the Parallel Memory Transmission. Only the page num- bers are printed, such as P.1, P.2 not 1/2, 2/2.
❒If you run out of memory, normal Memory Transmission takes place.
33