![](/images/new-backgrounds/1156700/15670051x1.webp)
Faxing
Loading Originals in the
Document Feeder
Use the Document Feeder to scan in a stack of originals in one operation.
| Limitation | |
2 | ||
❒ The maximum document length is | ||
| 17" (432mm). |
❒ Place all the originals to be sent in a single stack.
❒ You cannot set originals in the Document Feeder one page at a time or in sheaves.
❒ Do not open the Document Feeder while it is scanning the originals or your document could be jammed.
Note
❒When using Immediate Transmis- sion mode, you cannot send origi- nals longer than 17" (432mm). Use Memory Transmission Mode in- stead.
❒If an original jams, press the {Clear/ Stop} key then remove the original carefully.
❒If your original is bent or folded, flatten it before you set it.
❒Set thin originals on the exposure glass.
Reference
For information about the sizes and number of originals that can be placed in the Document Feeder, see Chapter 9 “Acceptable Types of Originals” in the Advanced Fea- tures manual.
A Adjust the document guide to match the size of your originals. Align the edges of your originals and stack them in the Document Feeder face up.
1.Limit mark
2.Document guide
Originals unsuitable for the Document Feeder
Do not set the following types of originals in the Document Feeder because they may be damaged. Place them on the exposure glass instead.
•Originals of sizes other than those specified in the following table
•Originals containing staples or clips
•Perforated or torn originals
•Curled, folded, or creased originals
•Pasted originals
•Originals with any kind of coating, such as thermosensitive paper, art paper, aluminum foil, carbon paper, or conductive paper
•Originals with index tabs, tags, or other projecting parts
16