![](/images/new-backgrounds/1156700/156700283x1.webp)
6. Key Operator Settings
Changing Key Operator Settings
This chapter explains about functions the key operator handles.
❖Key Operator Code
When the Key Operator Code is registered and turned on, user have to enter registered the Key Operator Code (maximum 8 digit) to operate Key Operator Tools. This prevents unauthorized peo- ple from changing registration.
Note
❒You can change the Key Operator Code between on and off with "System Settings". See Chapter 2 “Settings You Can Change with the User Tools” in the System Set- tings.
❒When you register or change the key operator access code, see Chapter 2 “13.Key Op. Tools” in the System Settings.
Counters
This function allows you to check the total number of pages transmitted and received on the display.
•Transmissions:
Total number of transmitted pages
•Receptions:
Total number of received pages
APress the {User Tools} key.
B Press 0 or 1 until "4. Fax Fea- tures" is displayed.
CPress the {OK} key.
D Press 0 or 1 until "6. Key Op. Tools" is displayed.
59