Auto Reduction
11
1
Auto Reduction
By default, if the receiver's paper is
smaller than the paper you are send-
ing on, the message is automatically
reduced to fit onto the paper available
at the other end.
Important
If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
You can switch this feature on and
off with the Us er Parameters. The
default setting is on. See P.72 “User
Parameters” (Switch01, Bit2).
AMake sure that the machine is in
Facsimile mode and the standby
display is shown.
BSet your original and select any
scan settings you require.
CPress the {
{{
{Transmission Option}
}}
} key.
The Transmission Option menu
appears.
DPress 0
00
0 or 1
11
1 until "7. Auto Re-
duction" is displayed and press
the {
{{
{OK}
}}
} key.
EPress 0
00
0 or 1
11
1 to select "On" or
"Off".
FPress the {
{{
{OK}
}}
} key.
GPress the {
{{
{Transmission Option}
}}
} key.
HSpecify the destination.
If you want to specify another des-
tination, press the {OK} key and re-
peat step H.
IPress the {
{{
{Start}
}}
} key.
Transmitter
(This machine)
Receiver
Reduction
ND1X02E0
ND1X02E1