Key Operator Settings
6
66
D Press 0 or 1 until "6. Key Op. Tools" is displayed.
EPress the {OK} key.
Note
❒If the key operator code is regis- tered and turned on, enter the
key operator code and press the {OK} key.
F Press 0 or 1 until "3. Forward- ing" is displayed.
GPress the {OK} key.
H Press 0 or 1 until "1. Prog. Sta- tion" is displayed
IPress the {OK} key.
J Press 0 or 1 to display the number of the forwarding station you want to register.
If a forwarding station is already registered, the fax number for that station is displayed.
KPress the {OK} key.
LEnter the other party's fax number with the number keys.
MPress the {OK} key.
The Forwarding Station's fax number is registered.
When specifying senders
APress the {OK} key.
B Enter the other party's name.
Enter the other party's Own Name or Own Fax Number.
CPress the {OK} key. The name is registered.
D If you want to register the
Specified Sender as a Wild- card, press 0 or 1 to select "Yes" or "No".
EPress the {OK} key.
To register another Specified Sender, repeat the above steps from step A.
To register a different Forward- ing Station, press the {Cancel} key and repeat the above steps from step I.
Limitation
❒Names for Specified Senders can be up to 24 characters long.
Note
❒You can confirm the names and fax numbers of Specified Senders on the Journal.
❒You can confirm registered Specified Senders on the Specified Sender list.
