Key Operator Settings

EPress the {OK} key.

Note

If the key operator code is regis- tered and turned on, enter the

key operator code and press the {OK} key.

F Confirm that "1. Counter" is dis- played.

GPress the {OK} key.

The number of pages transmitted is displayed. You can display the num ber o f pages r ec ei ved, scanned, or printed by pressing 0 or 1.

Authorized Reception

This feature helps you to reject junk mail. It lets you specify which termi- nals you wish to receive fax messages from; the others will be shut out. This is useful if you are very annoyed with someone.

You can register the following:

30 Specified Senders (up to 24 characters for each sender)

Wild Card

Important

We recommend that you print the Sender/Authorized Reception list and keep it when you register or change a sender. See P.64 “Sender (Authorized Reception) List”.

6H Once you have confirmed the number of pages, press the {OK} key.

I Press the {Cancel} key on each display until you reach the stand- by display.

Limitation

You cannot register a Specified Sender who does not have an Own Name or Own Fax Number.

You can register up to 30 senders for Forwarding and Authorized Reception functions. You some- times cannot register 30 senders depending on the number of send- ers registered with other functions. See P.65 “Forwarding”.

Note

To find out a senders Own Name/ Own Fax Number, check the Jour- nal.

You can specify whether to only receive messages from Specified Senders, or to receive all messages except those from Specified Send- ers. The default setting is "Receive from Authorized Senders". See P.72 “User Parameters” (Switch08, Bit2).

60

Page 143
Image 143
Savin 1018 manual Authorized Reception, Confirm that 1. Counter is dis- played Press the OK key