
Key Operator Settings
6
Programming specified senders
A Press the {User Tools} key.
B Press 0 or 1 until "4. Fax Fea- tures" is displayed.
CPress the {OK} key.
D Press 0 or 1 until "6. Key Op. Tools" is displayed.
EPress the {OK} key.
Note
❒If the key operator code is regis- tered and turned on, enter the
key operator code and press the {OK} key.
F Press 0 or 1 until "2. Authorized RX" is displayed.
GPress the {OK} key.
H Press 0 or 1 until "2. Program Sender" is displayed.
IPress the {OK} key.
J Enter the name for the Specified User.
Enter the other party's name or fax number.
Reference
For details about how to enter names, see Chapter 3 “Entering Text” in the Basic Features man- ual.
KPress the {OK} key.
L If you want to specify a wildcard, press the 0 or 1 key to select "Yes", or select "No".
Reference
See Chapter 3 “Wild Cards” in the Basic Features manual.
MPress the {OK} key.
The Specified User is registered.
If you want to register another Specified User, repeat from step I.
N Press the {Cancel} key on each display until you reach the stand- by display.
62