Facsimile User Tools
Changing the Initial Setup Transmission
When you turn on the machine or re- turn to Copy mode, the machine re- turns to the home settings. You can change these home settings so that the machine starts with your most fre- quently used features selected.
This procedure can be used to change the home settings for the following functions.
•Transmission mode
See Chapter 2 “Faxing” in the Basic Features manual.
•Resolution
See Chapter 2 “Resolution” in the
5Basic Features manual.
•Photo Original
See Chapter 2 “Original Type” in the Basic Features manual.
•Fax Reset Timer
See Chapter 1 “Starting the Ma- chine” in the Basic Features manual.
•On Hook Timeout
See P.25 “On Hook Dial”.
Note
❒You can also choose whether the machine returns to the home set- tings after each communication. See P . 72 “User Parameters” (Switch01, Bit7).
A Press the {User Tools} key.
B Press 0 or 1 until "4. Fax Fea- tures" is displayed.
CPress the {OK} key.
D Press 0 or 1 until "4. Initial Set- up TX" is displayed and press the {OK} key.
The "Initial Setup TX" menu is shown on the display.
E Press 0 or 1 until the mode you want to change is displayed and press the {OK} key.
Note
❒If you make a mistake, press the {Clear/Stop} key and enter the correct number.
F Select the home setting with the 0 or 1 key then press the {OK} key.
❖Transmission Mode
You can select the either way to send a fax message (Memory Transmission or Immediate Trans- mission).
54
