Transmission Features

Manual Dial

The external telephone is required.

Pick up the handset of the external telephone and dial. When the line is connected and you hear a high- pitched tone, press the {Start} key to send your fax message. If, on the oth- er hand, you hear a voice at the other

3end, continue your conversation as you would normally over the tele- phone.

Limitation

E Replace the handset of the exter- nal telephone.

After transmission the machine will return to standby mode.

The result of the transmission with manual dial is not mentioned in the Transmission Result Report (Immediate Transmission).

A Set your original and select any scan settings you require.

Reference

See Chapter 2 “Setting Origi- nals” in the Basic Features man- ual.

See Chapter 2 “Scan Settings” in the Basic Features manual.

B Pick up the external telephone.

You will hear a tone.

CDial.

If you make a mistake, replace the external telephone and try again from step B.

D When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax message.

26

Page 109
Image 109
Savin 1018 manual Manual Dial, Replace the handset of the exter- nal telephone, Pick up the external telephone