Key Operator Settings

PSTN Access Number

Use this setting to save having to en- ter a pause after the outside line ac- cess number when dialing. When you program an access number, a pause is automatically added as soon as that number is pressed. For example, if you register "0" as the PSTN Access Number, a pause will be inserted au- tomatically after dialing "0".

Limitation

Outside line access numbers can be up to 2 digits long.

This feature does not work when using On Hook mode or when di- aling from an external telephone.

Note

6After you have registered an out- side line access number, set the line to "Extension" in "Select Line". By default, this feature is set to "Out- side".

To register an outside line access number perform the following proce- dure.

A Press the {User Tools} key.

B Press 0 or 1 until "4. Fax Fea- tures" is displayed.

CPress the {OK} key.

D Press 0 or 1 until "6. Key Op. Tools" is displayed.

EPress the {OK} key.

Note

If the key operator code is regis- tered and turned on, enter the

key operator code and press the {OK} key.

F Press 0 or 1 until "9. PSTN Ac- cess No." is displayed.

GPress the {OK} key.

H Enter the outside line access number (2 - digits) with the number keys.

If you make a mistake, press the {Clear/Stop} key and try again.

IPress the {OK} key.

"Programmed" is displayed on the screen.

J Press the {Cancel} key on each display until you reach the stand- by display.

84

Page 167
Image 167
Savin 1018 manual Pstn Access Number