
Key Operator Settings
| F Press 0 or 1 until "4. User Pa- |
Printing the User Parameter List | |
| rameters" is displayed. |
|
Print this list to see the current User Parameter settings.
A Press the {User Tools} key.
6B Press 0 or 1 until "4. Fax Fea- tures" is displayed.
CPress the {OK} key.
D Press 0 or 1 until "6. Key Op. Tools" is displayed.
EPress the {OK} key.
Note
❒If the key operator code is regis- tered and turned on, enter the
key operator code and press the {OK} key.
GPress the {OK} key.
H Press the 0 or 1 key until "2. Print List" is displayed and press the {OK} key.
I Press the {Start} key to print the list.
Note
❒If you press {Cancel} before printing starts, the printing stops and the display shown in step H appears again.
J Press the {Cancel} key on each display until you reach the stand- by display.
76