Appendix

Limitation

There may be a difference in the size of the image when it is printed at the des- tination.

If you set an original larger than DLT/A3 on the exposure glass, only an area of DLT/A3 is scanned.

Note

Even if an original is correctly placed on the exposure glass or in the Docu- ment Feeder, a margin of 3mm around each edge of the original may not be sent.

If the receiver uses paper narrower than the original, the image will be re- duced to fit the paper width.

The machine detects paper sizes in the following ways.

When you set an original in the Document Feeder, an original narrower than about 9.1" (230mm) is scanned as 81/2" width.

An original wider than about 10.4" (263mm) is scanned as 11" width. Widths between 9.1" and 10.3" are scanned as 10" width.

Originals up to 47" (1200mm) in length can be scanned.

Refer to the table below for the sizes the machine can detect when you place an original on the exposure glass. Because the machine scans in non- standard size documents as one of the standard sizes, parts of the image may be truncated depending on the length of the document. For how to set non-standard size documents, see P.7 “Choosing the Area to be Scanned Your- self (Irregular Scan Area)”.

 

 

 

 

 

Length

 

 

 

 

 

 

 

 

 

 

 

 

 

∼12.5"

 

12.5"∼ 13.5"

13.5"∼

 

 

 

 

 

 

 

 

 

 

width

∼7.9"

not detected

 

81/2"⋅13"L

not detected

9

 

7.9"∼ 8.9"

LTL

 

81/2"⋅13"L

81/2"⋅14"L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.9"∼

LTK

 

not detected

11"⋅17"L

 

 

 

 

 

 

 

 

-Maximum Scan Area

Memory Transmission/Immediate Transmission *1

From the Document Feeder: 11"⋅17" / 297⋅432mm (W⋅L)

From the exposure glass: 11"⋅17" / 297⋅432mm (W⋅L)

*1 In the immediate transmission, the maximum scan area varies according to the reso- lution.

98

Page 181
Image 181
Savin 1018 manual Maximum Scan Area