Appendix
102
9
Initial Setup TX Allows you to change follow-
ing transmission function set-
tings:
• Transmission
•Resolution
• Photo Original
• Fax Reset Timer
• On Hook Timeout
P.54 “Changing the Initial Set-
up Transmission”
Initial Set Up RX Allows you to change follow-
ing reception settings:
• Reception Mode
• Checkered Mark
•Center Mark
•Print RX Time
•Forwarding
P.56 “Changing the Initial Set-
up Reception”
Counters Check the transmission, re-
ception, and totals on the dis-
play.
P.59 “Counters”
Authorized Reception When you register Specified
Senders in advance, you can
restrict senders from whom
you receive message.
P.60 “Authorized Reception”
Forwarding Transfers received messages
to a registered receiver (for-
warding destination).
P.65 “Forwarding”
Changing User Parameters Allows you to change the
function settings to meet your
needs.
P.72 “User Parameters”
Printing User Parameter List Allows you to print and check
User Parameter settings.
P.76 “Printing the User Param-
eter List”
Personal Code Registe rs personal codes for
each user. When each user en-
ters a personal code when
sending messages, you can
check the machine usage by
user. Personal Code is also
used for Restricted Access.
P.77 “Personal Codes”
Polling ID Registers ID required for us-
ing the Transfer Request.
P.81 “Polling ID”
Line Type Registers the type of line
(Tone or Pulse) you are con-
nected to.
P.82 “Line Type”
Feature name Description Reference