Faxing
CPress the {Speed Dial} key.
2
D Enter the two digit code (00 to 99) for the destination with the number keys.
Note
❒When a name is stored for the destination, the name is dis- played, and when no name is stored, the fax number is dis- played.
❒If you wish to dial another des- tination, press the {OK} key and dial another fax number.
❒If you make a mistake, press the {Clear/Stop} key, and try again.
E Press the {Start} key.
Groups
If you frequently send the same mes- sage to more than one place, program these numbers into a Group. Then you can send the messages to all the destinations in that Group with just a few keystrokes. You can also pro- gram a name for the Group (for exam- ple, "Branch Offices") which will be displayed before you press the {Start} key.
Preparation
You need to program the Groups. See P.50 “Registering Groups”.
Limitation
❒A Quick Dial programmed for Group cannot be used for other functions.
Note
❒Groups are only available with Memory Transmission.
❒To check the contents of the Groups, print the list.
❒You can program up to 9 Groups.
❒You can store up to 100 destina- tions in a Group. If a Quick Dial or Speed Dial is registered in two Groups, it takes up the space of one destination.
Reference
P.50 “Registering Groups”
A Make sure that the machine is in standby mode.
B Set your original and select any scan settings you require.
34
