Faxing
Dialing
There are three main ways to dial a | Number Keys |
number: |
❖Number keys:
Enter numbers directly using the
2 number keys on the right side of the operation panel.
❖ Quick Dials:
When you have stored a destina- tion's number in a Quick Dial key, you can dial the number by just pressing that key. Additionally, you can store a name that will ap- pear on the display whenever you press that Quick Dial.
❖ Speed Dials:
If you store a number in a Speed Dial, when you want to dial it just press the {Speed Dial} key followed by a 2 digit code. Like Quick Dials, you can store a name along with the number.
This section covers these features and others in more detail.
Enter numbers directly using the number keys on the right side of the operation panel.
Note
❒Maximum length of a fax number: 254 digits.
❒You can insert pauses and tones in a fax number. P.31 “Pause”, P.32 “Tone”
A Make sure that the machine is in standby mode.
B Set your original and select any scan settings you require.
C Enter the fax number with the number keys.
The digits appear on the display as you enter them.
Note
❒If you make a mistake, press the {Clear/Stop} key to erase the wrong digits and try again.
❒If you wish to send this message
to more than one destination, press the {OK} key, then enter the next destination.
D Press the {Start} key.
30
