Transmission Options

Polling Reception

Use this function if you want to poll a

1message from another terminal. You can also poll documents from many terminals with only one operation (use Groups to fully exploit this fea- ture).

Receiver

Sender

(This machine)

Transmission

 

Request

 

 

ND1X01E8

Limitation

 

Polling Reception requires that the other machine can perform Polling Transmission.

A Make sure that the machine is in Facsimile mode and the standby display is shown.

BPress the {Transmission Option}key.

12

CPress 0or 1until "8. Polling RX" is displayed.

DPress the {OK} key.

E Press 0 or 1 to select "On" or "Off".

FPress the {OK} key.

G Specify the other party's fax number.

H Press the {Start} key.

File Reserve Report

This report is printed after Polling Re- ception has been set up.

Note

By default, this report is turned off. Turn it on with the User Parame- ters. See P.72 “User Parameters” (Switch03, Bit3).

Communication Result Report

This report is printed after a Polling Re- ception has been completed and shows the result of the Polling Reception.

Note

You can also check the result of a Polling Reception with the Journal.

By default, this report is turned on. Turn it off with the User Parame- ters. See P.72 “User Parameters” (Switch03, Bit4).

Page 95
Image 95
Savin 1018 manual Polling Reception, File Reserve Report, Communication Result Report