Changing Key Operator Settings
N Press the {Cancel} key on each display until you reach the stand- by display.
Editing a Forwarding Station
A Press the {User Tools} key.
B Press 0 or 1 until "4. Fax Fea- tures" is displayed.
CPress the {OK} key.
D Press 0 or 1 until "6. Key Op. Tools" is displayed.
EPress the {OK} key.
Note
❒If the key operator code is regis- tered and turned on, enter the
key operator code and press the {OK} key.
F Press 0 or 1 until "3. Forward- ing" is displayed.
GPress the {OK} key.
H Press 0 or 1 until "1. Prog. Sta- tion" is displayed.
IPress the {OK} key.
J Press 0 or 1 to display the fax number of the Forwarding Sta- tion you want to edit.
6
KPress the {OK} key.
L Press the {Clear/Stop} key and en- ter the Forwarding Station's cor- rect fax number.
MPress the {OK} key.
The fax number is registered.
If you want to edit another For- warding Station, press the {Cancel} key and repeat the above steps from step I.
N Press the {Cancel} key on each display until you reach the stand- by display.
67
