3Com 3C589D manual Click Next, Enter the settings for the PC card

Page 24

Windows NT

3-7

13Click Next.

The Network Services window appears.

14Place a check mark in the box next to each desired service.

15Click Next to continue.

The next window states that Windwos NT is now ready to install networking components that you selected and others required by the system.

16Click Next to install the selected components.

17The Setup prompt states that Setup needs to copy Windows NT ﬁles.

18Enter the path to the Windows NT installation ﬁles and click Continue.

This opens the Etherlink III PC Card dialog box.

19Enter the settings for the PC card.

Select the appropriate settings for the card. In most cases, the default settings will work, but if you are unsure about what settings to use, ask your system administrator or MIS department.

20Click Continue.

If you are prompted for the bus type, select PCMCIA. If prompted for the Bus number, select 0. Click OK.

21Click OK to the next prompt.

22If you selected TCP/IP and have a DHCP server, click Yes.

23If you do not have a DHCP server, click No and get an IP address from your system administrator and enter it.

Windows NT ﬁles are copied to the hard drive.

If you are prompted for TCP/IP information, enter it and click OK.

The Network Setup Wizard shows a Bindings list.

24Click Next to continue.

25Click Next to allow Windows NT to start the network. The Domain/Workgroup Settings window appears.

Image 24

Contents LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Content IntroductionTroubleshooting Glossary Index FCC Class B Certification Statement CE Notice How to Use This Guide About this GuideIntroduction Conventions Convention DescriptionIntroduction 13C589D PC Card23CXE589DC LAN PC Card Features RequirementsNetwork Driver Installation Options TroubleshootingCard Services Transcend PC Link SmartAgent SupportPC C ARD Connecting the LAN PC Cards You must supply your own BNC T-connector 4CHAPTER 2 Installing the LAN PC Card Connecting the LAN PC Cards Installing the Network Driver Before You Install the Network DriverWhich Driver Installation Instructions Should You Use? WindowsWhich Windows 95 Version Are You Running? Restart the PC to login to the network Windows 95 Version 4.00.950AWindows 95 Version 4.00.95B Click OK to copy the manufacturers ﬁles from A\Click Finish to accept the driver Remove the EtherDisk diskette and click YesConﬁrming Installation Windows NTWindows NT 4 Installation without Networking Installed Place a checkmark in the Wired to the network boxClick Next to continue Enter the settings for the PC card Click NextWindows NT 4 Installation with Networking Installed Select the transport appropriate for the network clientWindows NT Version Select Other Requires disk from manufacturer from the listMicrosoft Windows for Workgroups WFW Installing the Network Driver Using the Windows menu, select NetworkNetwork Setup dialog box, select the Networks... button Before You BeginAutoLink for Windows 3.x, Windows for Workgroups, and DOS To display the ﬁle, type Supported Network Drivers Network Text File Name Network Driver Name Operating SystemTroubleshooting Testing the 3C589D PC Card Avoiding Memory Manager Conﬂicts Troubleshooting Tips \Type AutoLink.Log More Enter Changing Configuration Settings Option Default Setting Available SettingsChanging Power Management with Windows Changing Conﬁgurations Settings with DOSClick the Control Panel icon Click Systems Highlight the 3Com EtherLink III LAN PC CardConﬁguration Settings Descriptions CIS Memory AddressBase Address Power Management Interrupt Request LevelTransceiver Type Network Driver OptimizationVerifying That Card Services Is Installed Using the 3C589D PC Card Without Card ServicesAvoiding Memory Manager Conﬂicts 2APPENDIX a about Card Services Specifications SpeciﬁcationsPower Requirements Glossary Socket Services PC CardSocket TransceiverIndex NumbersIndex FCC Class B Certiﬁcation Statement CE Notice