3Com 10/100BASE-T4 PCI manual Loading the Network, Drivers, Summary of Driver Loading Procedures

3	LOADING THE NETWORK
	DRIVERS

This chapter describes how to load the network drivers required to let the 3C595-T4 PCI adapter operate with your network operating system. This information is arranged according to the following topics:

■Summary of driver loading procedures

■Using the EtherDisk diskette

■Accessing DOS

■Loading network drivers

Summary of Driver Loading Procedures

Table 3-1 summarizes the driver loading procedures based on the network operating system running on your computer.

Table 3-1 Summary of Driver Loading Procedures

Network Operating System	Driver Loading Procedure
Windows 95	Windows 95 will detect the presence of the T4 adapter
	and request a driver for it. Refer to the section “Using
	Windows 95.”
NetWare ODI:	AutoLink auto installation software loads all NetWare client
client environment	software, including drivers, if a single adapter is being
	installed in a NetWare DOS ODI client. Refer to the section
	“One Adapter in a Client” under “Using NetWare ODI.”
NetWare ODI:	Load the appropriate server drivers from the EtherDisk
server environment	diskette. Refer to the section “One or More Adapters in a
(versions 3.1X, 4.0X, 4.X)	Server” under “Using NetWare ODI.”
DEC® PATHWORKS®	Load the appropriate NDIS driver from the EtherDisk
Banyan® VINES®	diskette. Refer to the section “Loading NDIS Drivers.”
IBM® LAN Server
Microsoft® LAN Manager
Artisoft® LANtastic®
Windows NT 3.5x	Follow the instructions in the README.TXT file on the
Windows for Workgroups	EtherDisk diskette. If updating a driver, refer to the
	section “Updating NDIS Drivers.”