Adder Technology AVX4016IP General security and configuration steps, Configuration menus layout

Configuration menus layout

The menu options are arranged as shown here:

General security and configuration steps

To enable general security

Configuration Menu

Functions

Routing status

User Preferences

Global Preferences

Setup Options

Edit Computer List

Edit User List

Edit Autoscan List

(F1) Advanced Options

Restore Standard Mouse
Restore Intellimouse
Power Control
Clear UTP Extender Password
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
Configure IP port	Unit Configuration
	Network Configuration
	Modem Configuration
OSD Colour	Reset Configuration
Reminder Banner	AdderView CATx IP only
Reminder Colour
Screen Saver Type
Confirmation Box
Mouse Switching
Screen Saver
Autoscan Mode
Autoscan Period
OSD Dwell Time
User Timeout
RS232 Mouse Type
Mouse Type
Security
Language
Hotkeys
Keypad Controls
Exclusive Use
Automatic Logout
Audio
Add Computers

DDC Options

Power Control

USB Country Code

Setup Options 2 Force Mode

1Display the Configuration menu.

2Highlight ‘Setup Options’ and press .

3Highlight ‘Security’ and press to select ‘ENABLED’.

4Now create a new password for the ADMIN user account.

To set an ADMIN password

1Display the Configuration menu.

2Highlight ‘Edit User List’ and press .

3Highlight ‘ADMIN’ and press . Press again to accept the name ‘ADMIN’ without change.

4Enter an appropriate password for the ADMIN user account with regard to the following:

•The password can be up to 12 characters long.

•The password can use letters, numerals and/or certain punctuation marks.

•The password is not case sensitive.

5Press . The ‘Edit Access Rights’ menu will be displayed. However, as the ADMIN account always has access to all computers, press again to save the new password.

What to do if the ADMIN password has been forgotten.

To change the hotkeys

AdderView CATx units use and as their standard hotkeys. These can be changed if they clash with other software or hardware within the installation.

1	Display the Configuration menu.
2	Highlight ‘Setup Options’ and press .
3	Highlight ‘Hotkeys’ and press	to select the required

   

For a description of each option within the Configuration menus, see . Appendix 1 for more details.

hotkey combination. The options are: CRTL+ALT, CTRL+SHIFT,

ALT+SHIFT, ALT GR, LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT,

RIGHT CTRL+RIGHT ALT or DISABLED.

4 Press to return to the ‘Configuration Menu’.



25