Adder Technology CATX-SUNA, X200AS/R Remote user via X100/X200 extender, To connect a remote user

Remote user (via X100/X200 extender)

Up to four users can be placed a maximum of 300 metres (980 feet) from the AdderView CATx unit. Remote users are connected via an Adder X100 or X200 extender module and suitable category 5,

5e or 6 cabling (with no crossover). The AdderView CATx IP models provide two remote user ports.

Cable lengths for remote user locations

The maximum length of cable between a remote user and the AdderView CATx unit can be up to 300 metres (980 feet). However, bear in mind that the overall distance between any remote user and any computer system must not exceed 300 metres (980 feet).

In situations where any computer system will be placed a significant distance from the AdderView CATx unit, ensure that the distance to any remote user is similarly less than 300 metres (980 feet).

To connect a remote user

1Place an Adder X100 or X200 extender unit adjacent to the remote user location.

2Attach the video monitor,

keyboard, mouse, power adapter (and speaker) connectors to the sockets of the Adder

X100 or X200 module.

From mouse

From keyboardAdder X100/X200 module

3Lay a suitable length of category 5, 5e or 6 cabling between the Adder X100/X200 module and the AdderView CATx unit. Please refer to the section Cable lengths for remote user locations opposite.

4Attach the connector of the cable run to the socket of the Adder X100/X200.

Category 5, 5e or

6 cable leading to

AdderView CATx unit

From power adapter	Adder X100/X200
	module

5At the other end of the cable run, attach the cable connector to one of the sockets labelled CATx USER PORTS on the rear panel of the AdderView CATx unit.

AdderView CATx

rear panel

Note: The AdderView CATx model shown here is a non-IP version. The IP-version provides only remote user ports 3 and 4.

Category 5, 5e or 6 cable from Adder X100/X200 module

6Where necessary, use the in-built video compensation feature of the Adder X100/X200 module to eliminate any effects caused by the cable run. However, ensure that the links between the computers and the AdderView CATx have been compensated first. See remote user video compensation for details.

   



From video monitor 10