Adder Technology EPS-S8, X200AS/R Keyboard Control, When entering codes, Video Settings, Info

Keyboard Control

This option displays a keyboard control dialog and is useful for sending keyboard combinations (to the host) that are needed regularly or that are trapped by the AdderView CATx IP.

Enter the	Click to send
code here	the code

Click to send the contents of the clipboard to the host

When entering codes:

+means press down the key that follows

– means release the key that follows

+– means press down and release the key that follows

*means wait 250ms (note: if a number immediately follows the asterisk, then the delay will equal the number, in milliseconds)

It is automatically assumed that all keys specified will be released at the end, so there is need to specify -Ctrl or -Alt if these keys are to be released together.

See Appendix 8 for a list of key sequence codes that can be used. Examples:

‘Ctrl + Alt 12’ would be expressed as: +Ctrl+ Alt+1–1+2 +N means press the ‘N’ key

+Scroll means press the Scroll lock key +Space means press the space key

Video Settings

see next page

Info

When selected, this option displays an information dialog showing the current logged on users, the current host, its video mode and its mouse motion details.

KVM switch menu

This option displays the AdderView CATx main menu and provides access to the same options presented to local and remote users. The only option that cannot be accessed is Configure IP port. For details of the other options available, please refer to Appendix 1 - Configuration menus.

   



64