Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Making calls from the web interface
Sometimes, e.g. when you are configuring the system from a remote location, it is convenient to be able to make calls from the video system to ensure everything works as expected.
The Call page
Make a call
Input field: Enter one or more characters in the input field, until the name you want to call appears in the dynamic search list or, enter the complete name or number.
Dial: Press Dial to initiate the call.
Disconnect all: Press Disconnect all to end all calls.
Options: Click Options to change the bit rate for this call. Select the Call rate in the drop down list.
The call status page
The call status page appear when you make a call. Please allow for approximately 30 seconds after the call is up before checking call details.
You will find the following information on the call status page:
•Remote number
•Status: Connected
•Direction: Incoming/Outgoing
•Protocol: H323/SIP
•Transmit and receive call rates
•Encryption
•Audio: Transmit and receive protocols
•Video: Transmit and receive protocols and resolutions
•Presentation: Transmit and receive protocols and resolutions
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 14 | www.cisco.com |
Copyright © |