Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
User management
From this page you can manage the user accounts of your video system. You can create a new user, edit the details of an existing user, and delete a user.
User roles
You must assign one or more user roles to a user account. Three user roles, which possess different system rights, are defined:
•Admin: A user with admin rights can create a new user and change all settings, except the security audit configurations. This user cannot upload audit certificates.
•User: A user with user rights can make calls and search the phonebook.
•Audit: A user with audit rights can change the security audit configurations and upload audit certificates.
The roles ADMIN, USER and AUDIT have non- overlapping rights, but a user can be created with one or more roles to combine the rights of more than one role.
Note: It is very important that at least one user has ADMIN rights at all times.
The default user account
The system comes with a default user account. The user name is admin with no password set. The admin user has USER, ADMIN and AUDIT roles.
It is highly recommended to set a password for this user.
Security mode
If you have a JTIC labeled system, you can enable/disable the strong security mode from this page. Strong security mode sets very strict password requirements, and requires all users to change their password on next login.
The Users page
The system comes with admin as default user account. The admin user possesses USER, ADMIN and AUDIT roles.
User name | User role(s) |
You can create as many | Each user must have |
user accounts as you | one or more roles. |
like on your system. |
|
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 16 | www.cisco.com |
Copyright © |