Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Custom wallpaper
If you want the company logo or a custom picture to be displayed on screen, you may very well use a custom wallpaper.
Note: If your video system has a touch screen controller, please note that the custom wall paper applies to the main screen only and will not appear on the touch screen controller. When you choose a new predefined wallpaper on the touch screen, it will appear on both screens and replace your custom wall paper.
File format and picture size
The picture file format for the custom wallpaper is PNG. The maximum size is 1920x1200pixels.
Upload and activate the wallpaper
First you have to upload the wallpaper file to the codec, then you must activate the wallpaper.
The Wallpaper page
Upload the custom wallpaper file
1.Press Browse... and locate the wallpaper file (.PNG).
2.Press Upload to save the file to the codec.
3.Refresh the web page to see the wallpaper you just uploaded.
Activate the new wallpaper
1.Move to the Advanced configuration page and enter wallpaper in the search field. From the drop down list, select Custom. The new wallpaper will be displayed on screen.
2.If the new wallpaper does not show on screen, you may have to toggle once between Wallpaper: None and Custom to make the change take effect.
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 19 | www.cisco.com |
Copyright © |