Cisco Systems C90 Software upgrade, Software versions, Software release notes and upgrade files

Cisco TelePresence System Codec C90 and Profile 65” Dual using C90

Contents Introduction Web interface Advanced configuration Password protection Appendices

Administrator guide

Contact us

Software upgrade

From this page you can do software upgrades and add a release key and option keys.

Software versions

The C series codecs are using the TC software.

NOTE: Contact your system administrator if you have questions about the software version.

Software release notes and upgrade files

Cisco recommends reading the software release notes before upgrading the software.

Go to: http://www.cisco.com/en/US/products/ps11422/ tsd_products_support_series_home.html

For upgrade software download go to: http://www.cisco. com/cisco/software/navigator.html?a=a&i=rpm

Release key

The release key is required to be able to use any of the released software.

Contact your Cisco representative to obtain the release key.

The Upgrade Software page

Option key

An option key is required to activate any optional functionality, and you may have several option keys in your system. The options available are:

•Natural presenter

•Premium resolution

•Multisite

Contact your Cisco representative to obtain the option key(s).

Add the release and option keys

Contact your Cisco representative to obtain the required key(s). If you will add both a release key and one or more option keys, the valid procedure will be:

1.Enter the release key and press Add.

The key format: “1TC001-1-0C22E348” (each system will have a unique key).

2.Enter the option key and press Add.

The key format: “1N000-1-AA7A4A09” (each system will have a unique key).

3.If you have more than one option key, add the remaining keys.

Upgrade the software on the codec

4.Before you can start the upgrade you must download the software upgrade file. The file format: “s52000tc4_0_0. pkg” (each software version has a unique file name).

5.Press Browse... and select the .PKG file.

6.Press the Upgrade button to start the installation.

7.Leave the system to allow the installation process to complete. You can follow the progress on this page. When the upgrade is successfully completed a message will appear. The installation process may take up to 30 minutes.

D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011.	25	www.cisco.com
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.