Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Audio Input Microphone [1..8] Equalizer Mode | Audio Input Microphone [1..8] Mode |
Set the audio input microphone equalizer mode. | Set the audio input microphone mode. |
Requires user role: ADMIN | Requires user role: ADMIN |
Value space: <On/Off> | Value space: <On/Off> |
On: Enable the equalizer for the audio input microphone. | On: Enable the microphone connector. |
Off:No equalizer. | Off:Disable the microphone connector. |
Example: Audio Input Microphone 1 Equalizer Mode: Off | Example: Audio Input Microphone 1 Mode: On |
Administrator guide
Contact us
Audio Input Microphone [1..8] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a microphone audio input.
Requires user role: ADMIN
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is not displayed.
Off:No video source is associated.
Example: Audio Input Microphone 1 VideoAssociation MuteOnInactiveVideo: On
Audio Input Microphone [1..8] VideoAssociation VideoInputSource
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Range: Select one of the five video input sources.
Example: Audio Input Microphone 1 VideoAssociation VideoInputSource: 1
Audio Input Microphone [1..8] Level
Define the audio level of the Microphone input connector, in steps of 1dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value from 0 to 24dB.
Example: Audio Input Microphone 1 Level: 15
Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone connector can be set to line or microphone mode.
Requires user role: ADMIN
Value space: <Microphone/Line>
Microphone: Select Microphone when you have 48 V Phantom voltage and the
Line: Select Line when you have a standard balanced line input. The phantom voltage and pre- amplification is Off.
Example: Audio Input Microphone 1 Type: Line
Audio Output HDMI
[1, 3] Level
Define the output level of the HDMI output connector, in steps of 1dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of the menu values represented in dB.
Requires user role: ADMIN
Value space:
Range: Select a value from
Example: Audio Output HDMI 1 Level: 0
Audio Output HDMI
[1, 3] Mode
Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the audio channel on the HDMI output.
Off:Disable the audio channel on the HDMI output.
Example: Audio Output HDMI 1 Mode: On
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 35 | www.cisco.com |
Copyright © |